revoL annaerB
26-05-2013, 09:08 PM
My three little ladies were recently introduced to you with normal bodies so when I saw fully articulated dolls at a car boot sale I had to find out if I could put their heads on new bodies.
I have no idea if there is a better way to do this, this is a bit of a redneck procedure but it works enough for us.
Basically, there are two lugs to stop kids pulling the heads off, I don't know of any way of retracting the lugs so it's more a case of careful but forceful.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18787
Here we have a lovely lady who has volunteered to demonstrate.
In the next pic she doesn't describe it very well but there is a seam that runs down the sides of the neck and body, if you aren't careful this can open or break while removing the head.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18786
By holding the front and back of the neck in a firm grip you hold the seam together and prevent it opening up and keeps the head attachment in place so it pulls out of the head and not the body.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18785
With a good grip on the neck and holding the head firmly below the ears you pull at the head while twisting it from side to side, this makes it easier to remove. It does take quite a bit of effort so don't be shy but be careful if you see the seam begin to open at the top.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18784
As you can see in the next pic, there are two lugs sticking out of the side. These actually serve no purpose to the workings of the head and are simply to stop errant kids ripping the heads of little sisters barbie. Below the lugs is a round collar, this is what provides a snug fit for the head.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18783
Sometimes one of the lugs will break off, I found this quite disconcerting at first before I realized that they weren't necessary for our purposes.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18782
The head pushes back on by pushing down and side to side until the collar disappears into the head.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18781
Hope this helps anyone wishing to do the same procedure.
I have no idea if there is a better way to do this, this is a bit of a redneck procedure but it works enough for us.
Basically, there are two lugs to stop kids pulling the heads off, I don't know of any way of retracting the lugs so it's more a case of careful but forceful.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18787
Here we have a lovely lady who has volunteered to demonstrate.
In the next pic she doesn't describe it very well but there is a seam that runs down the sides of the neck and body, if you aren't careful this can open or break while removing the head.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18786
By holding the front and back of the neck in a firm grip you hold the seam together and prevent it opening up and keeps the head attachment in place so it pulls out of the head and not the body.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18785
With a good grip on the neck and holding the head firmly below the ears you pull at the head while twisting it from side to side, this makes it easier to remove. It does take quite a bit of effort so don't be shy but be careful if you see the seam begin to open at the top.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18784
As you can see in the next pic, there are two lugs sticking out of the side. These actually serve no purpose to the workings of the head and are simply to stop errant kids ripping the heads of little sisters barbie. Below the lugs is a round collar, this is what provides a snug fit for the head.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18783
Sometimes one of the lugs will break off, I found this quite disconcerting at first before I realized that they weren't necessary for our purposes.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18782
The head pushes back on by pushing down and side to side until the collar disappears into the head.
http://www.uklovedollforums.co.uk/forum/picture.php?albumid=993&pictureid=18781
Hope this helps anyone wishing to do the same procedure.