:tu Thanks for the update Flashgordoll its looking really good , no worries about the time
Thank you :tu

Finished your stand Needadreamgirl.:tu

I underestimated this one, must be over 3 days of work all in.. If I made these for a living I would have to charge 2.5 times the cost of what I've made it for otherwise I'd go bankrupt quickly. As long as it helps you I'm still pleased to have made it.

Anyways, enough moaning for today. Its all done, paint has dried off and it don't look half bad.

One thing to watch out for:
Be mindful of the hinge. Its strong but please be careful not to let the two sections twist sideways because if it did twist there is a chance it could break the hinge.
http://www.ourdollcommunity.com/gall...s/DSC03392.JPG

Butt pad made, the 10mm s/steel nut was TIG welded to a bit of s/steel plate which is screwed into a bit of ply wood, a double layer of seat foam/sponge was glued onto the ply and to finish off I just stapled a section of cotton over to finish it.

http://www.ourdollcommunity.com/gall...s/DSC03384.JPG

The butt pad nut serves as the lower winch mount nut.
http://www.ourdollcommunity.com/gall...s/DSC03385.JPG

There's just enough room for the winch handle to swing past.
http://www.ourdollcommunity.com/gall...s/DSC03386.JPG

In the testing pics I forgot to thread the strap through the bars of this winch, in these pics its in the correct position.
http://www.ourdollcommunity.com/gall...s/DSC03387.JPG

http://www.ourdollcommunity.com/gall...s/DSC03388.JPG

http://www.ourdollcommunity.com/gall...s/DSC03389.JPG

http://www.ourdollcommunity.com/gall...s/DSC03390.JPG

http://www.ourdollcommunity.com/gall...s/DSC03391.JPG

And that's that done.. phew! :D

Wow A BIG THANK YOU to you Flashgordoll it looks really well made . I can't thank you enough for hat you have done , I still need to send some measurements for the head hook which I will get to you asap . Thank you again a brilliant job well done :tu

lovely bit of work :tu suitably over engineered and I can't see that failing!

I suspect that when I get around to making myself something, to will look a bit more 'agricultural' :rolleyes:

A lot of work, Flash, but end result looks great! :b:b

Great work Flash...i pull my..

http://www.uklovedollforums.co.uk/fo...1&d=1501728495

Thanks everyone.;)

I'm well pleased how it came out and its mega strong so Needadreamgirl's Mrs Mechadoll will be safe.:D Due to be picked up today and head up to needadreamgirl providing the courier turns up..

Saxen I wish you luck when you build your own, it doesn't matter what it looks like as long as the structure can support your dolls weight easily, always best to over strengthen the structure than be on the limit. :tu

Needadreamgirl wanted me to post these photos of his very lovely Sin lady using the stand that he received today.:D

One hiccup is that the butt pad is too low which is a bummer butt should be an easy fix to make for needadreamgirl.

He's very pleased with it and its great to see this beautiful lady making good use of it.:tu

http://www.ourdollcommunity.com/gall...s/IMG_1333.jpg

http://www.ourdollcommunity.com/gall...s/IMG_1335.jpg

http://www.ourdollcommunity.com/gall...s/IMG_1336.jpg

http://www.ourdollcommunity.com/gall...s/IMG_1338.jpg

http://www.ourdollcommunity.com/gall...s/IMG_1340.jpg

http://www.ourdollcommunity.com/gall...s/IMG_1341.jpg

http://www.ourdollcommunity.com/gall...s/IMG_1344.jpg

Last few pics.

http://www.ourdollcommunity.com/gall...s/IMG_1345.jpg

:drool
http://www.ourdollcommunity.com/gall...s/IMG_1347.jpg

http://www.ourdollcommunity.com/gall...IMG_1348~0.jpg

:tu

good looking lady and a good looking stand nice work flashgordoll