Unfortunately the arms are lift up to detach type which had them falling off when she was moved around.
(5.jpg)
After some brain storming and brute force, I removed the hook clips and used a bolt to hold them in place. I then had to cut a small piece from the shoulder to access the securing nut.
(6.jpg)
I assembled the frame for the legs and added some tape to the joints as they were a little loose.
(7.jpg)
After finishing the leg frame I made the hips and spine which were also a little loose after tightening up the joints with tape I started fitting the foam parts for the legs.
(8.jpg 9.jpg)
|