After fitting the foam parts on feet, shins and thighs I started cutting and fitting the foam hips and taped the securely in to place.
(10.jpg)
Once secure I started fitting the upper body and bolting the arms on after fitting the arms and covering the holes.
(11)
I then fitted the upper body to the remaining spine and secured to the rest of the body
(12)
I then put on her soft foam head I spent some time looking for a face that could be used instead of the original head and found a PVC head cheap on eBay. And wig. Unfortunately the head looked a much lighter skin tone in the photo.
(13-14)
After a long week I had finished and only need to put on some skin.
(15-16)
|