Next step:
Swivel the top upwards so it rests shut (BE CAREFUL NOT TO TRAP YOUR FINGERS!)
2 M8 bolts secure it at the front (13mm spanner):
Next step is to mount the winch. I've spot welded the 3 mounting bolts to the winch mounting plate to make it easy for you to slide the 3 bolts through the mounting holes on the stand.
From the rear of the stand, guide the long bottom bolt through first and then guide the two shorter top bolts through.
Then you can do the nuts up (13mm spanner),
the bottom winch mount nut will be incorporated into the bum pad which I have yet to make.
