#11
|
|||
|
|||
Quote:
|
#12
|
||||
|
||||
As I have bought two JYs (their fingers aren't too bad, but I am careful with them), I shall email Sam at JY with some suggestions. He's very good at replying pretty promptly.
|
#13
|
||||
|
||||
Perhaps the melt point of nylon and TPE is a bit too close for comfort?
|
#14
|
||||
|
||||
I am sure with the amount of cloth webbing that they insist in wrapping around them they will be well insulated
__________________
See The Girls Main Photo Thread Here - https://www.uklovedollforums.co.uk/f...ad.php?t=15055 Instagram:- We are on Instagram as @victoria_ash10. https://www.instagram.com/victoria_ash10/ Twitter 'X':- https://twitter.com/Victori18624401?...jNQD_9cag&s=09 Facebook:- https://www.facebook.com/victoria.ash.1257 |
#15
|
|||
|
|||
Quote:
Without taking the topic to much away from the original thread, on Nylon washers there is an alternative. TPFE is a much better material to make washers from, that even when worn, it stays slick enough to as not to restrict movement in areas that rub against each other. |
#16
|
|||
|
|||
Quote:
The other was the 166C acquired late 2018. Neither of those two came with additional head connectors beyond he push on one's which is where my comment came from. Assuming what you say is true then I fear my comment, whilst based on facts from my perspective, may not be true so please ignore my previous comment re head connectors which was then apparently down to ommission from the box rather than policy. all the best, Shamus. |
#17
|
|||
|
|||
Quote:
Jinsan DO still supply both bolts (grub and push) but it seems that an error in packing resulted in my 166C arriving with the M8 hanger but nothing to attach it to and the 140's alternate bolt seems may have been lost when she was being photographed by the vendor. My comment was based on my own experience which I am assured is not what others have encountered. My appologies for a misleading comment based on personal experience based on errors rather than reality. I completely retract my previous statement about Jinsan needing to include the old M16 connectors as apparently, they do. Kindest regards, Shamus. |
#18
|
||||
|
||||
Quote:
Going back to the implanted hair I don't think I'd risk it as she spends most of her time in bed the hair gets tangled easily. It's just easier to swap wigs when I need to |
#19
|
|||
|
|||
Quote:
The M8 hook screw into the centre of an M16 which screws into the neck. With my 166C I received the M8 but nothing for it to screw into. It's been pointed out to me today that there should have also been an M16 in the box with the M8 which is what caused my confusion. I am going to use an Image here that belongs to Tommo (hope that you don't mind matey ). The one on the left (that I have) is an M8. The one on the right is M8 inside, M16 on the outside. Thats what was missing from the 166C. HTH, Shamus. p.s. on the finger wires. Yvettes were Fixed but took them 4 years to break wm166C two fingers broken in an accident (she caught charlotte who fell during a photoshoot... My fault, not theirs) but hand not compromised. (will fix soon) wm140 Hands are absolutely perfect. Older TPE with newer palm plate seemed the perfect mix. SM 155 all finger wires removed as they were not just pokes but started chewing up the palm of the hand. Wearing small white gloves keeps the hands realistic even though they are a bit flopsy |
#20
|
||||
|
||||
Quote:
|
|
|