UK Love Doll Forums  
Untitled Document

Go Back   UK Love Doll Forums > DS Doll Sweet.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-12-2018, 08:03 PM
rentell's Avatar
rentell rentell is offline
Bronze Member
 
Join Date: Nov 2009
Location: uk london
Posts: 195
Default Modding the foot for standing

I was asked to show how I added studs to my DS 167 so here it is......

Unfortunately some of the photos did not come out right but have a few to show you.


How it came about is that when moving her a foot caught on the floor making a small slit in her foot !
This gave me a reason to investigate further, repair or mod.
Sadly no photo of the foot plate , I did not investigate far as the heels they are still OK for now.
There is an 8mm round hole at the end of the pressed steel foot plate, all I have done is glued a plastic/nylon 8mm bolt in place using tube silicone from Screwfix, nothing fancy here.
A generous amount was squirted into the opening squidged about to even it up then put the bolt put in again with silicone.
Then allowed to harden for 48 hours
Job done, will mod the heel if and when an opening appears

The left photo shows the foot that was torn open, the bolt is in there and it just needs a final filling


So far so good there holding up OK but as always use at your own risk !!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.