Ex Lite tips and information

[CloudClimax]

Ex Lite Tips and Information

I just thought be useful to share with you tips and information on the amazing Ex Lite.

The link below is the video showing how to connect the pins and connect and disconnect the limbs.

Sometimes the plastic on plastic at first can be stiff due to the newness and friction.
I always suggest a small amount of Vaseline on the pins too, once you have connected them a few times the stiffness does wear off.

Videos from Ex Lite factory connecting the pins

https://www.dropbox.com/sh/vt5dzaiad...uqG43hm1a?dl=0

Useful links –

The full link with video and information (how to Care and look after your Ex Lite)

https://cloudclimax.co.uk/ex-lite-tips/

Other useful links
https://cloudclimax.co.uk/ex-lite-review/
https://cloudclimax.co.uk/lightweight-sex-doll/
https://cloudclimax.co.uk/doll-owners-gallery/
https://cloudclimax.co.uk/new-ds-lite-pre-register/
https://cloudclimax.co.uk/psion-satori-at-cloud-climax/

The box will come in a plain cardboard outer box which will be black vinyl stretch wrapped with fragile tape securing the box, the only label will be your delivery label with your address on the label sent from Cloud Enterprises for your personal discretion.

The box size is 100cm by 50 by 40cm and weight at 13kg so not difficult to lift on delivery.

The EX Lite is made from Polyurethane Foam which is similar to Memoryfoam.

You can find out more details about the EX Lite here.

https://cloudclimax.co.uk/new-ds-lite-pre-register/

You will find the size guide on the above link too for measurements.

There is a limited movement range compared to a silicone or TPE doll as the material is more likely to tear under pressure of extreme movements.

We consider the EX-Lite to be a level up from a good quality vinyl doll and is great for those who cannot lift the weight of a TPE or silicone as she only weighs about 6-8kg. She is also easy to store for those with little storage space or who need to sometimes put their doll away as the limbs detach.

The doll fits into the shipping box, with the limbs in one box below and the head and torso in a plastic mould above. This is all sent to you in a plain brown box.

You will receive images once the doll is ready for shipping the day before despatch.

Best Regards
Paul