Elodie YouQDoll Torso "Review"

[Tarlos]

Thanks for your review I was considering getting one of theses torsos in the future but it sounds like the head is not standard 16mm Thread meaning difficult to switch heads -

just for interest do the orifices have any ridges inside or tongue for added pleasure and what is she like to kiss soft ? my 6YE torso and head has not been beaten on that side of things except no tongue

the breasts sounds great softer which is great both torsos I have the breasts I think are a bit too firm

[Aly]

Hi, I will check on the head thread sizes and report later today. The choice of sizes does seem a bit odd but I guess there will be a technical reason for it. Maybe Caroline from YouQ who is now on here can also clarify.

[Aly]

Yes all 3 orifices have "ridges" or internal texture of varying pattern. The front LH has a very similar internal texture to my 6YE 14kg Torso (which I think is the same as yours) The face and lips are quite soft but probably not quite as soft as a typical human, There is no tongue as such just a moulded internal mouth shape. The breasts are slightly softer than my 6YE Torso but they are bigger so not a fair direct comparison. The way the breasts move and jiggle is very realistic. Actually the overall body shape is quite similar to the 6YE just that the YouQ is half as big again and about double the weight, She weighs about 30kg in her box including head.

The head connector is a double ended stepped stud with M8 on the head end and M16 on the body end,, like this https://www.amazon.co.uk/Stainless-S.../dp/B08MT2R7KN So you could fit any M16 head on the YouQ body and you could fit the YouQ head on any M16 body but you would need to use the YouQ stud.
The M8 stud looks a bit puny next to the M16 but it feels firm and works perfectly OK. Once screwed into the head up to the shoulder its quite rigid. I have no idea why its like this as the M8 just seems an un-necessary complication, unless the head has an alternative application where the M8 is required, Maybe Caroline from YouQ can clarify ?

[Tarlos]

Thanks Aly for your update on this Torso sounds good and at least I could still put an M16 head onto it for swopping out -

The extra weight does not bother me being a Torso they are so much easier to move about reason why I love them

I will seriously consider this one in the future

Thanks again

[YouQDoll-Caroline]

Originally Posted by Aly

Yes all 3 orifices have "ridges" or internal texture of varying pattern. The front LH has a very similar internal texture to my 6YE 14kg Torso (which I think is the same as yours) The face and lips are quite soft but probably not quite as soft as a typical human, There is no tongue as such just a moulded internal mouth shape. The breasts are slightly softer than my 6YE Torso but they are bigger so not a fair direct comparison. The way the breasts move and jiggle is very realistic. Actually the overall body shape is quite similar to the 6YE just that the YouQ is half as big again and about double the weight, She weighs about 30kg in her box including head.

The head connector is a double ended stepped stud with M8 on the head end and M16 on the body end,, like this https://www.amazon.co.uk/Stainless-S.../dp/B08MT2R7KN So you could fit any M16 head on the YouQ body and you could fit the YouQ head on any M16 body but you would need to use the YouQ stud.
The M8 stud looks a bit puny next to the M16 but it feels firm and works perfectly OK. Once screwed into the head up to the shoulder its quite rigid. I have no idea why its like this as the M8 just seems an un-necessary complication, unless the head has an alternative application where the M8 is required, Maybe Caroline from YouQ can clarify ?

Please check that the plug-in is plugged in and installed properly

[YouQDoll-Caroline]

Originally Posted by Tarlos

Thanks for your review I was considering getting one of theses torsos in the future but it sounds like the head is not standard 16mm Thread meaning difficult to switch heads -

just for interest do the orifices have any ridges inside or tongue for added pleasure and what is she like to kiss soft ? my 6YE torso and head has not been beaten on that side of things except no tongue

the breasts sounds great softer which is great both torsos I have the breasts I think are a bit too firm

Hi Tarlos, I am Caroline. Nice to meet you here. Yes, 16mm screw for head is standrad in this industry, even from the beginning. YouQ screw is 8mm-16mm plug screw, which the patent belongs to us, we invented this. following are the pictures https://drive.google.com/file/d/1HEzS7N4IgQn6WWnhHbYb-t-gV10y6i17/view?usp=sharing https://drive.google.com/file/d/19Ws...ew?usp=sharing https://drive.google.com/file/d/1hE_...ew?usp=sharing https://drive.google.com/file/d/18M8...ew?usp=sharing https://drive.google.com/file/d/1kkY...ew?usp=sharing
And let me clarify why we make this design and what going we will do in the near further: Before we change the screw design, we are changing the skull design and also material, we use PU foam materials, which can be make the head without any smell, and more realistic structure. Even you cannot see from the surface of the head, but certainly you will find it of good quality. Of cause if you wanna match with other bodies no problem, Screw is the simplest thing in the whole design.

But honestly, some of our customers wanna M16 screw directly, which will be convenient for them. We are going to change the head connector design, to meet customer's request. And what's more, our latest design is screw with Rocking function. Please check the picture:https://drive.google.com/file/d/1jvY...ew?usp=sharing

BTW, about the tongue, you can make separate purchase. Or note: A tongue for gift in next order.

Thanks in the end