I'm glad she arrived safely and you are happy with her. I do hope you feel better soon.:tu

She looks absolutely lovely in those photos. :drool I do question whether she needs clothes. :drool

Yup, clothes optional, but definitely a new wig needed for her. :tu

Oh my. Think me and April are in love with this beautiful lady. So I definitely buying this head may have to get lucid to order her direct. None heads in stock.
My dilemma is do I get a youqdoll body or another cst body which I love. Anyone have a youqdoll body if so are they as nice as cst

Thanks guys n gals

Well it's been around 4 months since I got my cst 160cm body. Now all she has done is lay in my bed, over the past week I've noticed the silicone layer has come loose from the core.
Is this normal for silicone dolls. Its happened around the breasts and now in-between the breasts. It looks no different as you look at it but when you touch it , that's when you notice it.
Anyone else with a cst body have this issue.
Just to clarify it was not like this when I got the body so no fault of the vender

Hello Glorificus,,

it is definitely not ok if the outer silicone layer comes loose. It‘s called delamination and can also happen when she‘s lying on her breasts. I had that happen on my first CST body which also had some other issues. It happened when I forced her into a too tight corset. As beautiful as the cleavage is it also puts a lot of stress on the small area between the breasts.

Should be able to be fixed with a syringe and silicone which is injected in the area but I did not try it yet, because it is not too noticeable.

Sorry to hear about that happening

Jo

Hi,

I’ve also had this issue with a CST165F. I’d recommend fixing it sooner rather than later as it’s only likely to get worse and be a bigger job to repair.

Luckily it is an easy fix. You need some flowable silicone, a syringe and a dispensing needle. I’d recommend a 14g size. This might look worryingly large but smaller needles are very difficult to push the silicone through and the puncture hole will naturally close when you remove the needle.

You can get a box of 100 for around £15 on Amazon. Each needle is only good for one use as you can’t really clean the silicone from them.

Pump a good quantity of silicone into the affected area, massage the area to spread the silicone, leave for 24hrs to cure and you should be golden.

As an FYI I’d also point out that this delamination can happen on the breasts themselves as they’re not gel-filled but rather very soft silicone moulds under the skin.

In my case. I also had it first occur between the breasts. I was too scared to poke holes in her so left it. The problem got worse, spreading to the top and bottom of each breast until I had no choice but deal with it. I ended up putting over a half dozen needle holes in her over a three day period to fix. Those holes are completely invisible and the skin is now firmly stuck to the core. Probably better than it’s ever been.

Talusia

Hi Jo and tulisia.

So I checked her out today and the problem is worse than I thought. Not only the breasts and in-between breasts but also started coming detached on the waist.
She has only ever been on her back on my bed.
No action with her I just put my arm around her when I sleep.
Like I said when I first got her she was perfect no problems at all. All this in 4 months.
I'm just glad I got her cheap as my first post explained.
I will definitely not be buying another cst body but would do the heads as nothing wrong with that.
Think I will just keep her as is and see how bad it does get.
Many thanks for your feedback I appreciate it alot

This can happen with silicone dolls. The PU foam core is sealed before the silicone is poured (otherwise you'd need a lot more silicone and get as lot more weight). the silicone skin layer can become de-laminated from this and you get what you are describing. it's most common at joints due to the movement, but could happen anywhere.

What Taluisa describes is a good way to solve the issue without being too invasive. At the waist you wont need much silicone injected, and between the breasts you can inject from the crease under the breast if yo get the angle right. the trick is getting the needle between the foam core and the silicone skin.

K

Hi,
Sorry for this experience, Can you email us some photos?

I will be visiting the factory and this would one of the topics to discuss.

Regards

OMG , why me. Take a few pictures of the silicone. It then made it my worst nightmare.