#11
|
||||
|
||||
Yup, as Mr. K says, don't remove it completely if you can help it as you have a baseline to work with.
Perhaps put a bit of greaseproof paper between the eye and the eyelash/lid whilst affixing. I am aware that acetone will melt the plastic of WM eyes. Essentially, acetone and ABS plastics hate each other with a vengeance! |
#12
|
|||
|
|||
Was that a good tip to use the saucepan ? What about removing the eyeball to avoid sticking it as well ?
|
#13
|
||||
|
||||
Advice much appreciated, thanks.
|
#14
|
||||
|
||||
Quote:
K |
#15
|
|||
|
|||
Thanks for tip. I was going to try Allie eyebacks in Spike but not now.
|
#16
|
||||
|
||||
Quote:
K |
#17
|
|||
|
|||
Explaining Spike
This is Spike. She's a DS167 with a Sinodoll S13 "Aurora" head which I drilled through to put a long eyebolt into the DS peg, so I could hang her up, as her feet were getting damaged even from the minimal amount of standing that she does.
http://www.uklovedollforums.co.uk/fo...423#post256423 Anyway, irony seems to be wasted on you lot. The eyebolt has the unfortunate effect of making her head look pointy, which Revol was kind enough to paint over. I don't know how he did it, and he also wiped out the date stamp. In the "weapons" thread I tried to do this on the camera and only succeeded in getting the factory default, but have found the handbook and now know how to switch it off. http://www.uklovedollforums.co.uk/fo...865#post251865 I was also able to open her mouth with a craft knife and found that there is an oral cavity although not advertised as such. Phil at TDH says S6, S7 and S17 have larger cavities. Trust this explains. J |
#18
|
||||
|
||||
My eyebacks are unlikely to be much use on a DS I'm afraid.
Mrs Allie. 💕 |
#19
|
||||
|
||||
It does indeed, Thanks Jock
K |
#20
|
|||
|
|||
Quote:
Mr Flibble (aka "Hunt the Shunt" on TDF) had success with using Micro Kristal Klear on both a TPE and Silicone doll. Hope no one gets angry with me posting a link to a TDF: https://dollforum.com/forum/viewtopic.php?t=148601 The great thing about Micro Kristal Klear, is that if you make a mess with it (Mr Flibble made a big mess, poor Jennifer's face was all covered in the white stuff), it just peels off. It took a couple of attempts with his Silicone Piper Jessica (had to hold the eyelash in place for a good two minutes.) Mr Flibble is such a klutz with these tasks. There was glue all over the place! Love from Miss K, XOXO |
|
|