|
|
#31
04-08-2022, 08:43 PM
|
||||
|
||||
Thanks, a way to go yet but it would be really good to fix the poor girl!
|
|
#32
06-08-2022, 05:10 PM
|
||||
|
||||
|
Starting to breath again (both of us)
 Not permanent yet but getting there.
|
|
#33
06-08-2022, 05:15 PM
|
||||
|
||||
|
While i agree with Karrot that a securing pin would be good i don't fancy drilling into the side of the tube and rod. It was horrible enough drilling straight into the end of the leg block. Several heart stopping moments when the drill snagged
 The rod is quite a tight fit so i may not get much adhesive around it. We will see. Plan B would be to make the rod and hole oval by filing so there is no real change or rotating. The 10mm rod is a bit larger than the hole so i already had to file it down somewhat. This was too horrible to immediately "upgrade" her right leg. I will probably put it off until it falls off as well.
|
|
#35
07-08-2022, 10:36 AM
|
||||
|
||||
|
Epoxy applied to hold (hopefully) the rod in the leg. 24Hrs to cure
|
|
#36
07-08-2022, 10:42 AM
|
||||
|
||||
|
Good (???) right leg back in place.
|
|
#37
07-08-2022, 10:48 AM
|
||||
|
||||
|
Fingers crossed
 K
__________________
Click the pics for their threads... "...there was an odd smell of fish coming from it.." The Tale of Fluffy Kittenpaws
|
|
#38
07-08-2022, 10:55 AM
|
||||
|
||||
|
Safer than her crossing her legs
|
|
#40
07-08-2022, 11:09 AM
|
||||
|
||||
|
Thanks, lets hope hopalong here thinks so as well!
Big test tomorrow - followed by tears (joy or sadness to be determined)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
