UK Love Doll Forums  
Untitled Document

Go Back   UK Love Doll Forums > Chinese Doll Forum. > WM Doll Forum.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-01-2021, 04:58 PM
oldgreysoulboy's Avatar
oldgreysoulboy oldgreysoulboy is offline
Silver Member
 
Join Date: Oct 2020
Posts: 456
Default Here we go again ... Window shopping only

I found myself looking at this doll at the doll house which is marked as a head #85



Which is not Lynn as listed in that thread courtesy of Muninn

And just in idle curiosity, as it is purely academic ... Do you think a WM158A in this form would get through UKBF?

I have my doubts but Phil is listing it as available. Good weight to height though! And more realistic proportions rather then the 155A
__________________
Ogsby
Reply With Quote
  #2  
Old 08-01-2021, 05:12 PM
shamus's Avatar
shamus shamus is online now
Golden Diamond Member
 
Join Date: Jan 2011
Location: The Shire
Posts: 7,125
Default

Quote:
Originally Posted by oldgreysoulboy View Post
I found myself looking at this doll at the doll house which is marked as a head #85



Which is not Lynn as listed in that thread courtesy of Muninn

And just in idle curiosity, as it is purely academic ... Do you think a WM158A in this form would get through UKBF?

I have my doubts but Phil is listing it as available. Good weight to height though! And more realistic proportions rather then the 155A
This girl got confiscated by border force and not returned when someone bought one through SSW. I really think that was the beginning of the end for Andy.

If you are going to buy one then Phil is the only one who would fight for her but you have to appreciate that her breasts are absolutely flat. We are not talking about even WM 168A flats.

Also her neck circumference and shoulder width will take heads intended for WM 125's.

Be warned, she could cause you problems.

Note though that the WM168A, with largeer A cups and wider circumference neck is exactly the same weight and a safer bet.

In short, I am not saying that you would not get the 158A but I am saying that she has a difficult history and you would need to be prepared for problems even if hopefully they do not materialise.

HTH,

Shamus.

p.s. This body was on my list but the trouble around it means I dropped her from the list... Same with the WM150B... Yvette has now given up on ever getting a new body
__________________
Reply With Quote
  #3  
Old 08-01-2021, 05:20 PM
Tommo10's Avatar
Tommo10 Tommo10 is offline
Administrator
 
Join Date: Feb 2018
Location: Tommo's Tardis
Posts: 7,172
Default

Quote:
Originally Posted by oldgreysoulboy View Post
And just in idle curiosity, as it is purely academic ... Do you think a WM158A in this form would get through UKBF?

I have my doubts but Phil is listing it as available. Good weight to height though! And more realistic proportions rather then the 155A
That doll will not get through UKBF and she's is one that's been the cause of trouble with vendors previously.
__________________
Twitter
https://twitter.com/Victori18624401?s=09
Reply With Quote
  #4  
Old 08-01-2021, 05:25 PM
shamus's Avatar
shamus shamus is online now
Golden Diamond Member
 
Join Date: Jan 2011
Location: The Shire
Posts: 7,125
Default

Actually, slightly different build but a very nice body with quite small A cups is the Irontech 150A.

There's a virgin one in Scotland on sale on here at the min.

Irontech TPE seems warmer than Jinsan. My first impression of it was that it felt cheaper but thats not the case, its just different and their skeletons are excllent.

Nothing against Irontech but I have never been so much of a fan of their faces (says someone with 4 of them!). However, I've got Jinsan tan and light tan heads on Irontech bodies so no worries there.

Just thought worth mentioning that a light, well made Irontech could tick your boxes.

Here's a link to Tommies for sales thread.

http://www.uklovedollforums.co.uk/fo...ad.php?t=14687

HTH,

Shamus.
__________________
Reply With Quote
  #5  
Old 08-01-2021, 05:28 PM
shamus's Avatar
shamus shamus is online now
Golden Diamond Member
 
Join Date: Jan 2011
Location: The Shire
Posts: 7,125
Default

Quote:
Originally Posted by Tommo10 View Post
That doll will not get through UKBF and she's is one that's been the cause of trouble with vendors previously.
Ey up matey,

I've offered up the WM168A and IT150A as alternatives for him to ponder. Any that you would add... Bugger... forgot... WM 157B how could I forget the 157B!!!
__________________
Reply With Quote
  #6  
Old 08-01-2021, 05:32 PM
oldgreysoulboy's Avatar
oldgreysoulboy oldgreysoulboy is offline
Silver Member
 
Join Date: Oct 2020
Posts: 456
Default

Quote:
Originally Posted by shamus View Post
Note though that the WM168A, with largeer A cups and wider circumference neck is exactly the same weight and a safer bet.
168cm is NOT petite it's average if not tall!

The UKBF algorithm makes no sense. Anyhoo that'll be a conversation to have with Phil if and when the time comes. No money right now for this and certainly not to lose down a drain.

But what head is that Shamus?
__________________
Ogsby
Reply With Quote
  #7  
Old 08-01-2021, 05:38 PM
shamus's Avatar
shamus shamus is online now
Golden Diamond Member
 
Join Date: Jan 2011
Location: The Shire
Posts: 7,125
Default

Quote:
Originally Posted by oldgreysoulboy View Post
168cm is NOT petite it's average if not tall!

The UKBF algorithm makes no sense. Anyhoo that'll be a conversation to have with Phil if and when the time comes. No money right now for this and certainly not to lose down a drain.

But what head is that Shamus?
sorry, which head? The one on the 158A? That one is head #85
__________________
Reply With Quote
  #8  
Old 08-01-2021, 05:43 PM
oldgreysoulboy's Avatar
oldgreysoulboy oldgreysoulboy is offline
Silver Member
 
Join Date: Oct 2020
Posts: 456
Default

Quote:
Originally Posted by shamus View Post
sorry, which head? The one on the 158A? That one is head #85
Really but Muninn's pictures have an open mouth with teeth showing.
__________________
Ogsby
Reply With Quote
  #9  
Old 08-01-2021, 05:44 PM
Tommo10's Avatar
Tommo10 Tommo10 is offline
Administrator
 
Join Date: Feb 2018
Location: Tommo's Tardis
Posts: 7,172
Default

Quote:
Originally Posted by shamus View Post
Ey up matey,

I've offered up the WM168A and IT150A as alternatives for him to ponder. Any that you would add... Bugger... forgot... WM 157B how could I forget the 157B!!!

How could you forget the 157b

Here she is in natural tpe tone.








#85 btw

Tommo
__________________
Twitter
https://twitter.com/Victori18624401?s=09
Reply With Quote
  #10  
Old 08-01-2021, 05:45 PM
Tommo10's Avatar
Tommo10 Tommo10 is offline
Administrator
 
Join Date: Feb 2018
Location: Tommo's Tardis
Posts: 7,172
Default

It is the angle of that photo, you can see her teeth on others.
__________________
Twitter
https://twitter.com/Victori18624401?s=09
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.